Spouse friendly compact sub
E15 is our answer to the need
for more output in a compact size. It is based on F15HP so it has
more output than our standard subs, yet we have carefully reduced
the size to minimize the visual impression of size without substantial
sonic compromise. We've reduced the width by 2" and the depth
by 1" while the height remains the same. So E15 can be considered
the smaller spouse-friendly version of F15HP.
There are other small but powerful subs on the market, but what E15 achieve is a smart mix of brute force, small size and finesse. Now the articulate and dynamic bass that our other subs have become known for is available with greater punch and smaller size.
Direct Servo Technology
All our subwoofers use our patented Direct Servo technology, providing high end performance at an affordable price. It allows us to use lighter and more efficient drivers and still achieve deep bass without using excessive amounts of power. The servo reduces memory effects, counteracts thermal compression and various forms of driver non linearities.
You can read about Direct Servo in more detail in our technology section.
View animation demonstrating how Direct Servo works
H600XLR3 Amplifier and DS1510
Driver
E15 now uses our high power H600XLR3 servo
amplifier and DS1510 driver. DS1510 features anodized aluminum cone,
a 3" voice coil, and 200 oz magnet. Its linear excursion range
has increased to +/- 20mm (from +/-15mm of DS1500). The entire subwoofer
is 12lbs heavier than DS1501.
The quickguide of the H600XLR3 amplifier
for sealed subs can be found
here . H600XLR3 amps do not have high pass filter RCA output,
nor speaker level inputs. The response curves with various extension
frequency/damping combinations of both amplifiers can be found in
our EQ page. The other two amplifier options
and their quickguide can be found here:
H600XLR2 and
H600PEQ3.
E15HP2 is the same as E15 except with DS1520
driver and HX1000XLR3 amplifier to offer 1.5db more output. This
model is only available with new order, not as an upgrade option.
Order links are at the bottom of the page.
The feet are sold separately. Black cones
are made of anodized aluminum. Price includes shipping to 48 US
continental states only. Shipping to other region or country should
inquire us for actual cost. Due to tariff increase, we have reduced
the multi-sub discount to 5%.
Our speaker level inputs are only compatible
with power amplifiers having single ended outputs with black lead
output labelled as "COM", "GND", or "Ground".
Wyre4sound power amplifiers and others with differential outputs
are not compatible. These amps need an XLR type 3-wire (one positive,
one negative, and one ground) for safe speaker level input operation.
Using Y-splitter on input connection increases
the subwoofer gain by 6db. High efficiency horn speakers (105db/Wm
and above) may require custom modification for "gain matching"
of the volume control knob (not to be mistaken as sub not keeping
up with horn speakers) when this connection method is not option
(e.g., single sub accepting both L and R inputs). To summarize,
customers who need to consider higher gain are those with all these
conditions: 1) has high efficiency horn speakers, 2) has no AVR
or pre-processor, and 3) cannot use Y-splitter to connect to multiple
inputs on a sub to increase gain by 6db. Please select "High
gain" option in the order.
We will not ship to commercial address without
public listing due to CC fraud concern. Exception can be requested
via email and phone calls.
We have limited qty of H600PEQ3 amps with
speaker level inputs.
Documentation:
H600PEQ3 Quickguide
H600XLR2 Quickguide
(to be discontinued)
H600XLR3 Quickguide
HX1000XLR3 Quickguide
Integration guide
|
Description:
E15 models with FREE SHIPPING to 48 US continental STATES
|
Price |
|
|
E15SE gloss black piano finish
with H600XLR3 amplifier and black cone driver |
$1599 |
|
|
E15 black oak grain finish
with H600XLR3 amplifier and black cone driver |
$1399 |
|
|
E15 black matte finish with
H600XLR3 amplifier and black cone driver |
$1399 |
|
|
Description:
Other Options only available to E15 |
Price |
|
|
Change to silver cone driver
for one subwoofer (no E15HP2) |
$120 |
|
|
High gain option to match
horn speakers (for non-AVR application) |
$20 |
|
|
Upgrade to H600XLR2 (with
one XLR in and one XLR out) |
$50 |
|
|
Description:
E15HP2 models with FREE SHIPPING to 48 US continental
STATES |
Price |
|
|
E15HP2 SE gloss black piano
finish with HX1000XLR3 Hypex amplifier and black cone driver
(back order) |
$1789 |
|
|
E15HP2 black oak grain finish
with HX1000XLR3 Hypex amplifier and black cone driver (back
order) |
$1579 |
|
|
E15HP2 black matte finish
with HX1000XLR3 Hypex amplifier and black cone driver (back
order till end of Nov) |
$1579 |
|
|
High gain option to match
horn speakers (for non-AVR application) |
$20 |
|
Spike Feet
Our subs can be placed directly on carpet floors
or matching spike feet are available. These are 1.2" in diameter
and 1.75" in height. The thread size is M10-1.5 where 1.5 is
the thread pattern distance. Spike feet are not recommended on hard
surfaces where we recommend the standard rubber feet which included
in our subwoofers. Free shipping in the shopping cart is only valid
when ordered and shipped with subwoofers.
|
Description |
Price |
|
|
A set of M10 Chrome spike
feet (add-on only at time of sub purchase) |
$65 |
|
|
A set of M10 Chrome spike
feet (purchase without sub) |
$75 |
|
Continue to Options & Features
|